Your Trusted Southlake, TX Radon Mitigation & Wet Basement Repair Experts

These photos are from a mold remediation job completed in Southlake, TX by Olympic Restoration Systems. We were contacted after a homeowner had mold growth confirmed by a licensed mold inspector and needed a licensed mold remediation company. Our Production Team was able to safely and efficiently remove the mold-damaged material and flooring from the unit. In the pictures, you can see where they set up containment and used HEPA vacuums to ensure that mold and other pollutants did not circulate throughout the home during the mold removal process. 

*If you think there is mold in your home, the first step is to contact a licensed mold inspector. Per state law, the licensed mold inspector and licensed mold remediation company must be separate entities. This is a protection for the homeowner. If mold growth is confirmed by a mold inspector, you should be given a mold protocol. The next step is to send this protocol to Olympic Restoration Systems so that you can receive a licensed mold remediation estimate. 

This customer called Olympic Restorations Systems to clean the air ducts throughout her home.  When Olympic Restoration Systems was contacted for a quote for cleaning of the duct work, we scheduled them with one of our Specialists for an assessment and quote. Once received, they proceeded with an air duct cleaning with Olympic Restoration Systems.  We removed the air registers and cleaned them. Then we used a HEPA vacuum for the diffuser box and the surrounding area. We cleaned the ducts using a negative air system combined with compressed air whips to break the debris free from the ducts. With this type of air duct cleaning, each duct is attached to a power negative air machine which draws 3500 cubic feet per minute through the duct and into the system. The system has three stages of filters with the last one being a HEPA filter which assures nothing is released into the home. We used a HEPA vacuum for the coils and the blower. We cleaned the supply and return plenums. We cleaned the plenum by using a HEPA vacuum. We treated it with an EPA registered antimicrobial solution. We finished by re-attaching all the ducts and assuring they were properly sealed.

These photos are from a mold remediation job completed in Southlake, TX by Olympic Restoration Systems. We were contacted after a homeowner had mold growth confirmed by a licensed mold inspector and needed a licensed mold remediation company. Our Production Team was able to safely and efficiently remove the mold-damaged material and flooring from the unit. In the pictures, you can see where they set up containment and used HEPA vacuums to ensure that mold and other pollutants did not circulate throughout the home during the mold removal process. 

*If you think there is mold in your home, the first step is to contact a licensed mold inspector. Per state law, the licensed mold inspector and licensed mold remediation company must be separate entities. This is a protection for the homeowner. If mold growth is confirmed by a mold inspector, you should be given a mold protocol. The next step is to send this protocol to Olympic Restoration Systems so that you can receive a licensed mold remediation estimate. 

The owner of this wellness facility contacted Olympic Restoration Systems after the building experienced water damage.  We sent our first available System Designs Specialist, Darrin, to the property for a free water damage estimate. Darrin assessed the property and provided the owner with a free quote for water damage. The owner accepted and proceeded with water damage cleanup from Olympic Restoration Systems. We sent our professionally trained crew to the property to remove all items with water damage. They carefully removed portions of the flooring and walls, and left everything in place that was not damaged.

This customer called Olympic Restorations Systems with a concern that they may have mold/mildew in the vents from the upstairs HVAC unit.  When Olympic Restoration Systems was contacted for a quote for cleaning of the duct work, we scheduled them with one of our Specialists for an assessment and quote. Once received, they proceeded with an air duct cleaning with Olympic Restoration Systems.  We removed the air registers and cleaned them. Then we used a HEPA vacuum for the diffuser box and the surrounding area. We cleaned the ducts using a negative air system combined with compressed air whips to break the debris free from the ducts. With this type of air duct cleaning, each duct is attached to a power negative air machine which draws 3500 cubic feet per minute through the duct and into the system. The system has three stages of filters with the last one being a HEPA filter which assures nothing is released into the home. We used a HEPA vacuum for the coils and the blower. We cleaned the supply and return plenums. We cleaned the plenum by using a HEPA vacuum. We treated it with an EPA registered antimicrobial solution. We finished by re-attaching all the ducts and assuring they were properly sealed.

Southlake Wellness Center contacted Olympic Restoration Systems for water restoration/drying services due to a leak in the water heater expansion tank, The

water affected the water heater closer, the lab room, the break room, parts of the hall surrounding the lab and break room, and the

desk area across the hall (in the office area). Our Production Team removed all water and mold damaged property, while saving any property that could be preserved. 

This home was the victim of a lot of water damage throughout the entire home, and even in the garage. The homeowner contacted Olympic Restoration Systems to remove any water-damaged property. One of our System Designs Specialists, Darrin, provided a free water restoration estimate for the homeowner. The homeowner was pleased with the water restoration pricing and solution and proceeded with the work from Olympic Restoration Systems. This included removing all water-damaged drywall, ceiling, and flooring while leaving any undamaged property in place. The Production Team also used air movers and HEPA vacuums to continue the drying process and to assist with air quality in the home.

These homeowners found mold in their storage closet from a previous water leak and called us in the assess the damage and get rid of the mold.

Once we enclosed the area for the safety of the air quality, we removed the mold damaged wall and cleaned the space with a HEPA vacuum as well as an EPA registered antimicrobial solution.

These homeowners were having trouble with a rotten subfloor. They contacted our team. Our specialist discovered high humidity readings and rotting wood. They decided to replace the subfloor and have our team encapsulate to prevent damage to the new one. They choose CleanSpace drainage matting, CleanSpace liner, a SaniDry Sedona dehumidifier, and a sump pump. The system came with two sensors which send humidity readings to a panel inside the home, ensuring the owners they were no longer having humidity issues.